Application:

WMX

Hybrid® horn and reflex loaded subwoofer

The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid® loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.

A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid® technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.

Accessories
Accessories

Features


  • Very high output compact Hybrid® folded horn/reflex loaded subwoofer.
  • Single 18" (460mm) ultra-long excursion high power drive unit
  • Frequency response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
  • 104dB 1W/1m
  • Fast integral rigging system
  • Compatable with W8LM and W8LMD line array elements
  • Can be ground stacked or flown
  • Socket for pole mounted W8LMD

Applications


  • Dedicated flown or groundstacked sub for use with W8LM and W8LMD
  • Ground stacked sub with any Martin Audio Wavefront products
  • Fixed installations
  • Live sound reinforcement
  • Corporate events
  • Theatre sound reinforcement
+
Technical Specification – View
TYPE Hybrid® horn and reflex loaded sub-woofer
FREQUENCY RESPONSE (1) 35Hz-150Hz ± 3dB, -10dB @ 28Hz
DRIVERS 18" (460mm)/ 4" (100mm) voice coil, ultra-long
excursion, water resistant cone
RATED POWER (2) 1000W AES, 4000W peak
RECOMMENDED AMPLIFIER MA12K
SENSITIVITY (3, 6) 98dB (open space), 104dB (half space)
MAXIMUM SPL
(calculated @ 1m)
128dB continuous, 134dB peak (open space)
134dB continuous, 140dB peak (half space)
NOMINAL IMPEDANCE 8 ohms
CROSSOVER 70Hz-150Hz active low pass via DX1.5 or DX2 controller
ENCLOSURE Rectangular, multi-laminate birch ply
FINISH Textured black paint
PROTECTIVE GRILLE Black perforated steel
CONNECTORS 2 x Neutrik NL8
FITTINGS Proprietary rigging system
Interlocking skids on top & bottom
4 x bar handles
2 x pocket handles
Mounting clips for optional lid
Top mounted top hat fitting
DIMENSIONS
(inc. wheels)
(W) 620mm x (H) 620mm x (D) 905mm (1032mm)
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.6ins)
WEIGHT
87kg (191lbs)
+
Technical Drawing – View

Touring and Theatre

Further Information

MLA PORTAL
CDD Series Video
MLA Mini Video
MLA Brand Video
MLA PORTAL

Recommended Amp

MA12K