Back to Top

This site uses cookies.

Buy or Rent Now

The CSX112-WR is an ultra-compact direct radiating sub-bass system designed to extend the bandwidth and increase the headroom of CDD full-range models from the CDD5TX-WR to the CDD10-WR and is suitable for outdoor applications where it will be subject to changing environmental conditions, but sheltered from direct exposure to the elements. It features a very efficient 12" (300mm) long-throw bass driver with a high power 3" (75mm) voice coil and generously-sized reflex ports for low noise, high power operation.

Features

  • Compact, direct-radiator subwoofer
  • 12” (300mm) driver with 3” (75mm) voice coil
  • High efficiency 100dB/1W/1m half-space
  • Water resistant cone
  • Large ports for reduced air noise
  • Ultra-compact, architecturally-friendly enclosure
  • Zinc plated mild steel grille with powder coated finish
  • Plywood cabinets with polyurea coating
  • Operating temperature -20°C to +70°C
  • Environmentally tested to meet IP24
  • Flying points with fixings made from stainless steel
  • Black or white standard colour options

Applications

  • Outdoor Restaurants
  • Bars
  • Hotel Areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

With a response of 48Hz-150Hz ± 3dB, the ultra-compact size of the CSX112-WR makes it an ideal partner for CDD Series systems where space is at a premium. The enclosure is constructed from plywood with polyurea coating, while the driver is protected by a water and particle resistant zinc plated mild steel grille with powder coated finish, which is pre-curved to withstand physical damage.

Finished in black (RAL9005) or white (RAL9016) as standard, CSX112-WR is supplied with flying points with fixings made from stainless steel. Operating temperature is from -20°C to +70°C and they are environmentally tested to meet IP24.

When used with CDD full-range systems, crossover and EQ functions can either be performed by the DX0.5, DX1.5 and DX2 system controllers, or by an MA Series amplifier with onboard DSP option.

Links
User guide Brochure Datasheet Settings [v3.6]
Specification
TYPE Compact, single driver, direct radiating subwoofer.
FREQUENCY RESPONSE (1) 48Hz-150Hz ± 3dB
-10dB @ 35Hz
DRIVER 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone.
RATED POWER (2) 400W AES, 1600W peak
RECOMMENDED AMPLIFIER MA3.0
SENSITIVITY (10) 100dB
MAXIMUM SPL (9) 126dB continuous, 132dB peak (half space).
NOMINAL IMPEDANCE
DISPERSION (-6dB) Omnidirectional
CROSSOVER 80-120Hz active
ENCLOSURE 52 litre, Exterior grade plywood, Flying points with fixings made from stainless steel.
FINISH Black or white Poly Urea coating
PROTECTIVE GRILLE Black or white zinc plated mild steel grille with powder coated finish.
ENVIRONMENTAL Rated at IP24
CONNECTORS Low profile 20A push-lock. weatherproof input panel cover with cable gland.
PIN CONNECTIONS Left to right: Input+, Input -, Link -, Link+
DIMENSIONS (W) 487mm x (H) 385mm x (D) 410mm
(W) 19.2ins x (H) 15.2ins x (D) 16.1ins
WEIGHT 22kg (48.5lbs)

Architectural Specs

CSX112-WR
Architectural Specifications

The loudspeaker shall be an ultra-compact subwoofer consisting of one 12” reflex-loaded, long-excursion, low frequency transducer with a water-resistant cone.

The on-axis frequency response shall be 48Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 132dB peak calculated at 1 metre. Power handling shall be 400W AES, 1600W peak. Rated impedance shall be 8 ohms. The loudspeaker shall be operated in conjunction with a dedicated electronic controller.

The input connector shall be a low-profile 20A push-lock type with a waterproof cover incorporating a cable gland. The enclosure shall be constructed from plywood finished with a polyurea coating and flyable via fitted threaded inserts with stainless steel screws. The driver shall be protected by a perforated, zinc-plated steel grille with a powder coated paint finish. The loudspeaker shall meet the IP24 environmental rating.

Dimensions (W x H x D) shall be 487mm x 385mm x 410mm (19.2in x 15.2in x 16.1in). Weight shall be 22kg (48.5lbs).

The loudspeaker shall be the Martin Audio CSX112-WR.

Drawings

Martin Audio CSX112-WR Tech Drawing

Technical Drawings for CSX112-WR.

All information is Copyright. Martin Audio Ltd.

Downloads

JPEG DWG PDF

Accessories

Also Available in this Series...

How can we help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Advice