|TYPE||Three-way bi-amp trapezoid Hybrid® fully horn loaded|
|FREQUENCY RESPONSE (5)||50Hz-18kHz ± 3dB|
|RATED POWER (2)|
|MAXIMUM SPL (9)||133dB continuous, 139dB peak|
|DISPERSION (-6dB)||70 ̊ horizontal, 40 ̊ vertical|
|CROSSOVER||200Hz active, 2kHz passive|
|ENCLOSURE||250 litre, multi-laminate birch ply|
|FINISH||Textured black paint|
|PROTECTIVE GRILLE||Black perforated steel|
|CONNECTORS||2 x NL4 type|
|PIN CONNECTIONS (INPUT)|
|PIN CONNECTIONS (LINK)||1+/- to 1+/-|
|DIMENSIONS||(W) 1066mm x (H) 560mm x (D) 780mm (911mm)|
(W) 42ins x (H) 22ins x (D) 30.7ins (35.9ins)
The Blackline H3H+ is a very high performance, all-horn, three-way system in a single, horizontally formatted, wide-bandwidth package. The drivers have been developed for improved performance in all bands. The Hybrid® low frequency section comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil driver that is reflex loaded to extend the LF output to below the natural cut-off point of the horn. The LF driver features a water resistant cone and triple roll surround for increased excursion.
- All-horn three-way system
- ‘Phase-ball’ loaded mid-driver
- Hybrid® LF section
- Fitted with handles and castors
- Horizontal format for low profile installs
- Five year limited warranty
- Larger club performance
- Large scale installs
The mid-horn of the H3H+ has a unique ‘phase-ball’ loading device which maintains the constant directivity characteristics of the horn at the upper end of its range.
Driven by a 10” (250mm) midrange driver with an aluminium demodulating ring for improved high-mid clarity and reduced distortion when driven hard. The 70° x 40° HF section of the H3H+ features a neodymium 1” (25mm) exit compression driver with a Kapton diaphragm for high sensitivity and extended HF performance. The internal mid/high passive crossover allows this three-way system to be driven in a bi-amp configuration.
A Martin Audio M3+ or DX1.5 Electronic Controller is available to provide H3H+ crossover and limiter facilities.