CDD/CDD-WR SeriesInstalled Sound

CSX212-WR

Weatherised Compact, Direct-Radiator Subwoofer

CSX212-WR Subwoofer
This is now a legacy product.
Please review our SX subwoofer range

With twin high-efficiency 12" (300mm)/3" (75mm) voice coil long-throw bass drivers and optimally-sized reflex ports to minimise air noise, the CSX212-WR is the perfect sub-bass where low frequency extension and impact is required from a very compact, unobtrusive, low-profile enclosure and suitable for outdoor applications where it will be subject to changing environmental conditions but sheltered from direct exposure to the elements.

Features

  • Compact, direct-radiator subwoofer
  • 2 x 12” (300mm) drivers with 3” (75mm) voice coils
  • Water resistant cones
  • Compact, low-profile styling
  • Large ports for reduced air noise
  • Zinc plated mild steel grille with powder coated finish
  • Plywood cabinets with polyurea coating
  • Operating temperature -20°C to +70°C
  • Environmentally tested to meet IP24
  • Flying points with fixings made from stainless steel
  • Black or white standard colour options

Applications

  • Outdoor Restaurants
  • Bars
  • Hotel Areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

The CSX212-WR is designed to be used with CDD Series full-range systems from the CDD5-WR to the CDD12-WR and extends the low frequency operating range of the combined system down to 40Hz. The enclosure is constructed from plywood with polyurea coating, while the drivers are protected by a water and particle resistant zinc plated mild steel grille with powder coated finish, which is pre-curved to withstand physical damage.

Finished in black (RAL9005) or white (RAL9016) as standard, CSX212-WR is supplied with flying points with fixings made from stainless steel. Operating temperature is from -20°C to +70°C and they are environmentally tested to meet IP24.

When used with CDD full-range systems, crossover and EQ functions can either be performed by the DX0.5 or DX4.0 system controllers, or by an iKON amplifier

Links
Brochure Datasheet Settings
Specification
TYPECompact, dual-driver, direct radiating subwoofer.
FREQUENCY RESPONSE (1)48Hz-150Hz ± 3dB
-10dB @ 35Hz
DRIVER2 x 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone.
RATED POWER (2)800W AES, 3200W peak
SENSITIVITY (10)106dB
MAXIMUM SPL (9)132dB continuous, 138dB peak (half space)
NOMINAL IMPEDANCE
DISPERSION (-6dB)Omnidirectional
CROSSOVER80-120Hz active
ENCLOSURE100 litre, Exterior grade Plywood, Flying points with fixings made from stainless steel.
FINISHBlack or white Poly Urea coating
PROTECTIVE GRILLEBlack or white zinc plated mild steel grille with powder coated finish.
ENVIRONMENTALRated at IP24
CONNECTORSLow profile 20A push-lock. weatherproof input panel cover with cable gland.
PIN CONNECTIONSLeft to right: Input+, Input -, Link -, Link+
DIMENSIONS(W) 872mm x (H) 385mm x (D) 437mm
(W) 34.3ins x (H) 15.2ins x (D) 17.2ins
WEIGHT39.5kg (87lbs)
Architectural Specs
Martin Audio CSX212-WR

The loudspeaker shall be a compact subwoofer consisting of two 12” reflex-loaded, long-excursion, low frequency transducers with water-resistant cones.

The on-axis frequency response shall be 48Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 138dB peak calculated at 1 metre. Power handling shall be 800W AES, 3200W peak. Rated impedance shall be 4 ohms. The loudspeaker shall be operated in conjunction with a dedicated electronic controller.

The input connector shall be a low-profile 20A push-lock type with a waterproof cover incorporating a cable gland. The enclosure shall be constructed from plywood finished with a polyurea coating and flyable via fitted threaded inserts with stainless steel screws. The drivers shall be protected by a perforated, zinc-plated steel grille with a powder coated paint finish. The loudspeaker shall meet the IP24 environmental rating.

Dimensions (W x H x D) shall be 872mm x 385mm x 437mm (34.3in x 15.2in x 17.2in). Weight shall be 39.5kg (87lbs).

The loudspeaker shall be the Martin Audio CSX212-WR.

Technical Drawings & 3D Models
Martin AudioCSX212-WR Tech Drawing

All information is Copyright. Martin Audio Ltd.

Technical Drawings for CSX212-WR

JPEG DWG PDF

 

3D SketchUp Models for CSX212-WR

none currently available

 

Revit File 

none currently available

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0