|TYPE||Compact, direct radiating subwoofer.|
|FREQUENCY RESPONSE (1)||40Hz-150Hz ± 3dB
-10dB @ 35Hz
|DRIVER||18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone.|
|RATED POWER (2)||1000W AES, 4000W peak|
|MAXIMUM SPL (9)||132dB continuous, 138dB peak (half space).|
|ENCLOSURE||160 litre, Exterior grade Plywood, Flying points with fixings made from stainless steel.|
|FINISH||Black or white Poly Urea coating|
|PROTECTIVE GRILLE||Black or white zinc plated mild steel grille with powder coated finish.|
|ENVIRONMENTAL||Rated at IP24|
|CONNECTORS||Low profile 20A push-lock. weatherproof input panel cover with cable gland.|
|PIN CONNECTIONS||Left to right: Input+, Input -, Link -, Link+|
|DIMENSIONS||(W) 662mm x (H) 530mm x (D) 640mm|
(W) 26.1ins x (H) 20.9ins x (D) 25.2ins
The CSX118-WR is a compact, high performance subwoofer that extends the low frequency operating range of the combined system to 35Hz and provides exceptional low frequency impact. An ideal partner for the CDD10-WR, CDD12-WR and CDD15-WR, it is suitable for outdoor applications where it will be subject to changing environmental conditions but sheltered from direct exposure to the elements. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.
- Compact, direct-radiator subwoofer
- 1 x 18” (460mm) driver with 4” (100mm) voice coil
- Water resistant cone
- Large ports for reduced air noise
- Zinc plated mild steel grille with powder coated finish
- Plywood cabinets with polyurea coating
- Operating temperature -20°C to +70°C
- Environmentally tested to meet IP24
- Flying points with fixings made from stainless steel
- Black or white standard colour options
- Outdoor Restaurants
- Hotel Areas
- Nearfield Systems in Outdoor Stadia
- Transport Hubs
- Concourses and Theme Parks
The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from plywood with polyurea coating, while the driver is protected by a water and particle resistant zinc plated mild steel grille with powder coated finish, which is pre-curved to withstand physical damage.
Finished in black (RAL9005) or white (RAL9016) as standard, CSX118-WR is supplied with flying points with fixings made from stainless steel. Operating temperature is from -20°C to +70°C and they are environmentally tested to meet IP24.
When used with CDD full-range systems, crossover and EQ functions can either be performed by the DX0.5, DX1.5 and DX2 system controllers, or by an MA Series amplifier with onboard DSP option.
Martin Audio CSX118-WR
The loudspeaker shall be a compact subwoofer consisting of one 18” reflex-loaded, long-excursion, low frequency transducer with a water-resistant cone.
The on-axis frequency response shall be 40Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 138dB peak calculated at 1 metre. Power handling shall be 1000W AES, 4000W peak. Rated impedance shall be 8 ohms. The loudspeaker shall be operated in conjunction with a dedicated electronic controller.
The input connector shall be a low-profile 20A push-lock type with a waterproof cover incorporating a cable gland. The enclosure shall be constructed from plywood finished with a polyurea coating and flyable via fitted threaded inserts with stainless steel screws. The driver shall be protected by a perforated, zinc-plated steel grille with a powder coated paint finish. The loudspeaker shall meet the IP24 environmental rating.
Dimensions (W x H x D) shall be 530mm x 662mm x 640mm (20.9in x 26.1in x 25.2in). Weight shall be 43kg (94.8lbs).
The loudspeaker shall be the Martin Audio CSX118-WR.