CDD/CDD-WR SeriesInstalled Sound

CSX118-WR

Weatherised Compact, Direct-Radiator Subwoofer

CSX118-WR Subwoofer
This is now a legacy product.
We recommend SX118

The CSX118-WR is a compact, high performance subwoofer that extends the low frequency operating range of the combined system to 35Hz and provides exceptional low frequency impact. An ideal partner for the CDD10-WR, CDD12-WR and CDD15-WR, it is suitable for outdoor applications where it will be subject to changing environmental conditions but sheltered from direct exposure to the elements. It features a long-excursion 18” (460mm)/4” (100 mm) voice coil driver with a water-resistant cone and triple roll surround in a compact reflex enclosure.

Features

  • Compact, direct-radiator subwoofer
  • 1 x 18” (460mm) driver with 4” (100mm) voice coil
  • Water resistant cone
  • Large ports for reduced air noise
  • Zinc plated mild steel grille with powder coated finish
  • Plywood cabinets with polyurea coating
  • Operating temperature -20°C to +70°C
  • Environmentally tested to meet IP24
  • Flying points with fixings made from stainless steel
  • Black or white standard colour options

Applications

  • Outdoor Restaurants
  • Bars
  • Hotel Areas
  • Nearfield Systems in Outdoor Stadia
  • Transport Hubs
  • Concourses and Theme Parks

The design of the 18” driver maximises output while minimising power compression and distortion, and the four reflex ports have a large frontal area to reduce turbulent air noise at very high levels. The enclosure is constructed from plywood with polyurea coating, while the driver is protected by a water and particle resistant zinc plated mild steel grille with powder coated finish, which is pre-curved to withstand physical damage.

Finished in black (RAL9005) or white (RAL9016) as standard, CSX118-WR is supplied with flying points with fixings made from stainless steel. Operating temperature is from -20°C to +70°C and they are environmentally tested to meet IP24.

When used with CDD full-range systems, crossover and EQ functions can either be performed by the DX0.5 or DX4.0 system controllers, or by an iKON amplifier

Links
Brochure Datasheet Settings
Specification
TYPECompact, direct radiating subwoofer.
FREQUENCY RESPONSE (1)40Hz-150Hz ± 3dB
-10dB @ 35Hz
DRIVER18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone.
RATED POWER (2)1000W AES, 4000W peak
SENSITIVITY (10)102dB
MAXIMUM SPL (9)132dB continuous, 138dB peak (half space).
NOMINAL IMPEDANCE
DISPERSION (-6dB)Omnidirectional
CROSSOVER80-120Hz active
ENCLOSURE160 litre, Exterior grade Plywood, Flying points with fixings made from stainless steel.
FINISHBlack or white Poly Urea coating
PROTECTIVE GRILLEBlack or white zinc plated mild steel grille with powder coated finish.
ENVIRONMENTALRated at IP24
CONNECTORSLow profile 20A push-lock. weatherproof input panel cover with cable gland.
PIN CONNECTIONSLeft to right: Input+, Input -, Link -, Link+
DIMENSIONS(W) 662mm x (H) 530mm x (D) 640mm
(W) 26.1ins x (H) 20.9ins x (D) 25.2ins
WEIGHT43kg (94.8lbs)
Architectural Specs
Martin Audio CSX118-WR

The loudspeaker shall be a compact subwoofer consisting of one 18” reflex-loaded, long-excursion, low frequency transducer with a water-resistant cone.

The on-axis frequency response shall be 40Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 138dB peak calculated at 1 metre. Power handling shall be 1000W AES, 4000W peak. Rated impedance shall be 8 ohms. The loudspeaker shall be operated in conjunction with a dedicated electronic controller.

The input connector shall be a low-profile 20A push-lock type with a waterproof cover incorporating a cable gland. The enclosure shall be constructed from plywood finished with a polyurea coating and flyable via fitted threaded inserts with stainless steel screws. The driver shall be protected by a perforated, zinc-plated steel grille with a powder coated paint finish. The loudspeaker shall meet the IP24 environmental rating.

Dimensions (W x H x D) shall be 530mm x 662mm x 640mm (20.9in x 26.1in x 25.2in). Weight shall be 43kg (94.8lbs).

The loudspeaker shall be the Martin Audio CSX118-WR.

Technical Drawings & 3D Models
Martin AudioCSX118-WR Tech Drawing

All information is Copyright. Martin Audio Ltd.

Technical Drawings for CSX118-WR

JPEG DWG PDF

 

3D SketchUp Models for CSX118-WR

none currently available

 

Revit File 

none currently available

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0