BlacklineX SeriesInstalled SoundLive Sound

Blackline X10

10" Passive Two-way Portable Loudspeaker

Blackline X10 Top
Blackline X10 Side
Where to Buy or Rent

The X10 is a high performance yet very compact two-way passive loudspeaker system which utilises a 10” (250mm)/2.5” (63mm) voice coil LF driver and a 1” (25mm) exit HF compression driver with a 1.4” (35mm) polyimide diaphragm. The rotatable 90° x 50° HF horn has equal horizontal and vertical mouth dimensions for directivity control in both planes.

Features

  • Compact passive two-way system
  • Symmetrical multi-angle plywood enclosure
  • User-rotatable 90° x 50° horn
  • Vertical and horizontal orientation
  • Screw-free, cloth-backed perforated steel grille
  • Integral ergonomic handle
  • Pole-mount bung maintains clean lines
  • 8Ω nominal impedance
  • Twin NL4 connectors
  • Flexible mounting options via M8 inserts

Applications

  • Portable sound reinforcement
  • Live music clubs
  • Bars and restaurants
  • Nightclubs
  • Unobtrusive stage monitoring
  • Corporate AV events and conferences
  • Weddings and parties
  • Main PA infill
  • Secondary stages at festivals
  • HoW, leisure centres and retail outlets

It has a multitude of professional applications — from distributed sound reinforcement, HoW and AV events to frontfill/infill and use as an unobtrusive stage monitor. With a maximum SPL of 124dB @ 1m, it is uniquely placed to meet the foreground requirements of music bars and clubs that require upfront sound levels from a very compact enclosure. Use with a BlacklineX Series subwoofer will enable the X10 to operate as small dancefloor or sound reinforcement system that is remarkably powerful for its size, as well as being extremely portable.

The X10 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.

A full-range passive two-way system, the X10 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximise its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.4 or DX0.6.

Specification
TYPECompact, passive two-way system
FREQUENCY RESPONSE (5)65Hz-20kHz ± 3dB, -10dB @ 55Hz
DRIVERLF: 10” (250mm)/2.5” (63.5mm) voice coil, ferrite motor system
HF: 1” (25mm) exit/1.4” (35mm) voice coil, polyimide dome compression driver
RATED POWER (2)250W AES, 1000W peak
SENSITIVITY (8)94dB
MAXIMUM SPL (9)118dB continuous, 124dB peak
NOMINAL IMPEDANCE
DISPERSION (-6dB)90° H x 50° V (user-rotatable)
CROSSOVER2.4kHz passive
ENCLOSUREMulti-angle birch/poplar ply
FINISHBlack textured paint
PROTECTIVE GRILLEBlack perforated steel with scrim cloth backing
CONNECTORS2 x NL4 type
PIN CONNECTIONS (INPUT)1+/1-
PIN CONNECTIONS (LINK)1+/- to 1+/-
FITTINGS19 x M8 inserts, pole-mount socket, 1 x bar handle
DIMENSIONS(W) 324mm x (H) 522mm x (D) 289mm
(W) 12.8ins x (H) 20.6ins x (D) 11.4ins
WEIGHT14kg (30.9lbs)
ACCESSORIESWall bracket, eyebolts
Architectural Specs
Martin Audio Blackline X10

The loudspeaker shall be a passive, two-way system. Its transducers shall consist of a reflex-loaded 10” low frequency driver and a 1.4” diaphragm/1” exit compression driver mounted on a high frequency horn which shall be user-rotatable to enable vertical or horizontal orientation of the enclosure.

Horizontal dispersion shall be 90° and vertical dispersion shall be 50°. The on-axis frequency response shall be 65Hz-20kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 124dB peak calculated at 1 metre. Power handling shall be 250W AES, 1000W peak. Rated impedance shall be 8 ohms.

The rear connector panel shall be fitted with two NL4 type connectors. Low and high frequency sections shall be integrated by an internal 2.4kHz passive network. For optimal performance the loudspeaker shall be operated in conjunction with a dedicated electronic controller.

The symmetrical, multi-angle enclosure shall be made from plywood and finished with a black textured paint. The enclosure shall be fitted with a pole-mount socket and M8 threaded inserts to accommodate eyebolt suspension and a wall bracket. The drivers shall be protected by a perforated steel grille with scrim cloth backing.

Dimensions (W x H x D) shall be 324mm x 522mm x 289mm (12.8in x 20.6in x 11.4in). Weight shall be 14kg (30.9lbs).

The loudspeaker shall be the Martin Audio Blackline X10.

Technical Drawings & 3D Models
Martin AudioBlackline X10 Tech Drawing

All information is Copyright. Martin Audio Ltd.

Technical Drawings for Blackline X10

JPEG DWG PDF

 

3D SketchUp Models for Blackline X10

SKP-Black

 

Revit File 

none currently available

Available in this Series

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0