TYPE | Three-way bi-amp trapezoid Hybrid® fully horn loaded |
FREQUENCY RESPONSE (5) | 48Hz-18kHz ± 3dB |
DRIVER |
|
RATED POWER (2) |
|
SENSITIVITY (8) |
|
MAXIMUM SPL (9) | 134dB continuous, 140dB peak |
NOMINAL IMPEDANCE | LF: 8 ohms, MF + HF: 8 ohms |
DISPERSION (-6dB) (5) | 70˚ horizontal, 40˚ vertical |
CROSSOVER | 200Hz active, 2kHz passive |
ENCLOSURE | 250 litre, multi-laminate birch ply |
FINISH | Textured black paint |
PROTECTIVE GRILLE | Black perforated steel |
CONNECTORS | 2 x Neutrik NL4 |
PIN CONNECTIONS |
|
DIMENSIONS |
|
WEIGHT | 79kg (174.2lbs) |
The new FH3 is a very high performance, all-horn, three-way system in a single, horizontally formatted, wide-bandwidth package aesthetically designed to complement the Blackline3 collection.
Features
- All-horn three-way system
- ‘Phase-ball’ loaded mid-driver
- Hybrid® LF section
- Fitted with handles and castors
- Horizontal format for low profile installs
Applications
- Larger club performance
- Large scale installs
High quality and unique drivers deliver exceptional performance in all bands. The Hybrid® low frequency section comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil ultra-long-excursion neodymium magnet driver that is also reflex loaded to extend the LF output to below the natural cut-off point of the horn. The LF driver features a water resistant cone and triple roll surround for increased excursion.
The mid-horn of the FH3 has a unique ‘phase-ball’ loading device which maintains the constant directivity characteristics of the horn at the upper end of its range. It is driven by a 10” (250mm) midrange driver with an aluminium demodulating ring for improved high-mid clarity and reduced distortion when driven hard. The 70° x 40° HF section of the FH3 features a neodymium 1” (25mm) exit compression driver with a polyamide diaphragm for high sensitivity and extended HF performance. The internal mid/high passive crossover allows this three-way system to be driven in a bi-amp configuration.
A Martin Audio DX0.4, DX0.6 and DX4.0 Electronic Controller are available to provide FH3 crossover and limiter facilities.