|TYPE||Ethernet to U-NET™ bridge|
|SUPPORTED PROTOCOLS||Ethernet and U-NET™|
|CONTROL APPLICATION||Martin Audio VU-NET™|
|AC OPERATING RANGE||100-240VAC Nominal, 50-60Hz|
|AUDIO INPUTS 1, 2 and 3||3 x 3 pin female XLR type|
|ETHERNET||1 x Neutrik® Ethercon|
|MAINS POWER||3 pin IEC with cable locking mechanism|
|FUSE||User-replaceable 1A T-type 20mm|
|AUDIO OUT AND U-NET||6 x ODU 8-pin connector ports. Audio In 1, 2 ,3, Out on ports 1, 3, 5|
|UNET STATUS||Bi-colour Green/Red LED on port 1 and 6|
|IP CONFIGURATION||Yellow LED: On = Static IP, Off = Dynamic|
|IP RESET (TO DYNAMIC)||Recessed push button|
|ETHERNET CONNECTION||Green LED = Online|
|MAINS POWER||Red LED = Mains power present|
|DIMENSIONS||(W) 482mm x (H) 1U/44mm x (D) 268mm (W) 19in x (H) 1U/1.75in x (D) 10.6in|
U-Hub is an Ethernet to U-NET bridge equipped with analogue and AES3 digital audio transport. It facilitates PC connection and VU-NET™ software control of MLA Series arrays and subwoofers via their inbuilt proprietary U-NET network.
- Ethernet to U-NET™ bridge
- IP addressable (static and dynamic)
- Analogue and digital audio transport
- Designed to work with DX4.0 loudspeaker processor for Dante™ digital audio distribution
- Network platform/converter for MLA Series systems
Converting TCP/IP to U-NET protocol, U-Hub allows MLA Series enclosures to self-address and identify their position within an array, as well as supporting a simple-to-use redundant loop. With U-Hub, an MLA Series system with onboard U-NET can be seamlessly integrated into a TCP/IP network and controlled via VU-NET software.
When used in conjunction with the Martin Audio DX4.0 networked system controller, U-Hub can connect audio and network to an MLA Series system with a single cable via a Dante™ digital audio network.