SX SeriesInstalled SoundLive Sound

SX110

10" Passive Slimline Subwoofer

Adorn SX110 Subwoofer
Where to Buy or Rent

The SX110 is an slimline subwoofer designed for applications that call for increased impact and low frequency performance in a visually unobtrusive enclosure. Its very small size makes it perfectly suited to installed sound applications where space is limited such as under banquette seating.

Features

  • Slimline direct-radiator subwoofer
  • 1 x 10” (250mm) driver with 2” (50mm) voice coil
  • Large port for reduced air noise
  • Perforated steel grille
  • 8Ω nominal impedance
  • M8 flying inserts

Applications

  • Retail outlets
  • Cafes, bars and restaurants
  • Museums and Houses of Worship
  • Fitness clubs
  • Educational facilities
  • Hotels and convention centres

The SX110 features a 10” (250mm)/2” (50mm) voice coil driver and generously sized low frequency port for reduced air noise. An ideal subwoofer to augment the bass output of ADORN Series or small CDD loudspeakers, it can be used on the ground or flown using integral M8 inserts.

The SX110 enclosure is constructed from plywood and finished in black or white textured paint as standard. An impact-resistant perforated steel grille protects the drivers, and rubber feet on the base resist movement.

When used with Martin Audio full-range systems, crossover and EQ functions can be performed by the DX0.4, DX0.6 or DX4.0 system controller.

Links
User guide Brochure Datasheet Settings [v1.9]
Specification
TYPESlimline, direct radiating subwoofer
FREQUENCY RESPONSE (1) 50Hz-150Hz ± 3dB,
-10dB @ 42Hz
DRIVER 1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet
RATED POWER (2) 250W AES, 1000W peak
RECOMMENDED AMPLIFIER VIA 2502
SENSITIVITY (10) 97dB
MAXIMUM SPL (9) 121dB continuous, 127dB peak (half space)
NOMINAL IMPEDANCE
DISPERSION (-6dB) Omnidirectional
CROSSOVER 80-120Hz active
ENCLOSURE Plywood
FINISH Black or white
PROTECTIVE GRILLE Perforated steel
CONNECTORS 2 x NL4 type
PIN CONNECTIONS (INPUT) +1, -1 Link through: +2, -2
PINS CONNECTIONS (LINK) +1, -1 Link through: +2, -2
FITTINGS 12 x M8 inserts
DIMENSIONS (INCL FEET)
  • (W) 417mm x (H) 297mm x (D) 415mm
  • (W) 16.4ins x (H) 11.7ins x (D) 16.3ins
WEIGHT 12kg (26.5lbs)
Architectural Specs
Martin Audio SX110

The loudspeaker shall be an ultra-compact subwoofer consisting of a 10” reflex-loaded, long-excursion, low frequency transducer.

The on-axis frequency response shall be 50Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 127dB peak calculated at 1 metre. Power handling shall be 250W AES, 1000W peak. Rated impedance shall be 8 ohms. The rear connector panel shall be fitted with two NL4 type connectors and the loudspeaker shall be operated in conjunction with a dedicated electronic controller or amplifier.

The enclosure shall be made from plywood and fitted with M8 threaded inserts for attachment to suspension hardware. The drivers shall be protected by a perforated steel grille.

Dimensions (W x H x D) including feet shall be 417mm x 297mm x 415mm (16.4in x 11.7in x 16.3in). Weight shall be 12kg (26.5lbs).

The loudspeaker shall be the Martin Audio SX110.

Available in this Series

How Can We Help?

If you have an audio project, whether that’s a Live Event or an Installation, and would like some expert advice or interested in a demo, please register your details

Get Project Advice
Return to Site

All material © 2023.
Copyright Martin Audio Ltd.
Subject to change without notice.
Martin Audio Ltd. Reg. No. 4824341

Martin Audio and the Martin Audio Logo are trademarks of Martin Audio Ltd and are registered in the United Kingdom, United States and other countries.
v2023:1.0